With the advancement of automobile 3D printing, Divergent 3D

Back in July 2015, we took a look at the Divergent 3D Blade, the world’s first 3D-printed supercar. More than just a car, the Blade represented a paradigm shift in auto manufacturing … and we really weren’t all that sure we’d hear about it again. Well, we have. Divergent 3D has now branched out into motorcycles and is pressing forward with its 3D printing auto-making revolution at the LA Auto Show.

Divergent 3D has been rather busy since we looked at it last year. Over the course of 2016, it’s taken home a North American Technology Innovation Award from research and consulting firm Frost & Sullivan and announced partnerships with PSA Group (Peugeot) and global engineering and research firm Altran. So, instead of mere utopian promises, Divergent now has some name-brand recognition and collaboration to point to.

As it explains in a September 2016 announcement, PSA Group will explore implementing Divergent 3D’s proprietary 3D printing tech with a view towards becoming a global leader in efficient automotive manufacturing. The strategic partnership will pursue several joint development projects.

“We’re convinced that these spectacular advances in 3D printing will help position PSA Group as a leader in automobile manufacturing,” said Carlos Tavares, chairman of the Managing Board PSA Group. “This has the potential to dramatically scale down the size and scope of our manufacturing footprint, reduce overall vehicle weight and build complexity, while also giving us almost limitless flexibility in design output. We are talking about a radical change for our industry.”

Divergent 3D chassis
Divergent 3D chassis

C.C. Weiss/New Atlas

We looked more closely at Divergent’s software-hardware 3D printing platform in our original article, but the short of it is that it relies on 3D-printed aluminum connectors (nodes) to hold carbon fiber structural components together. Divergent explains that this type of construction will eliminate the reliance on large factories filled with expensive heavy metal tooling, thereby drastically reducing the environmental footprint of auto manufacturing, which it identifies as much larger than the tailpipe footprint.

The chassis it’s showing in LA looks light years more advanced than the chassis revealed last year and includes a combination of 3D-printed aluminum, extruded aluminum and carbon fiber components. The chassis was built entirely without hard metal tooling and its components selected for an optimization of weight and strength.

Divergent's chassis features 3D-printed aluminum nodes, extruded aluminum sections and carbon fiber beams
Divergent’s chassis features 3D-printed aluminum nodes, extruded aluminum sections and carbon fiber beams

C.C. Weiss/New Atlas

“The Model T of the 20th century was all about mass production,” Divergent CEO Kevin Czinger explained at the company’s LA press conference last week. “The Model T and the cars of the 21st century are going to be all about volume customization. We’re going to be able to move auto manufacturing from massive, one-size-fits-all factories to smaller, localized factories that can produce very profitable vehicles, with very high functionality, with very fast cycle times, and a much reduced impact on the environment.”

It can’t be easy to encapsulate all Divergent wants to do in digestible, 20-minute press conference form, and while the chassis was interesting to look at, it didn’t quite have immediate, attention-grabbing presence. What does have that presence is a flashy supercar prototype. So Divergent also pulled the cloth off a new version of the Blade supercar, which looks largely the same as last year, save for a vibrant new paint job that absolutely popped in the radiant light of its LA booth.

The Blade features 3D-printed components below its deep-purple body
The Blade features 3D-printed components below its deep-purple body

C.C. Weiss/New Atlas

Divergent didn’t detail any new specs for the Blade at the press conference, and the engine of record on its website is still the 700-hp bi-fuel turbo four-cylinder it spoke of last year. The company has backed off of its two-second 0-60 mph (96.5 km/h) claims, now listing a more believable but still-super-quick 2.5-second estimate.

Divergent 3D’s technology can’t make much of an impact by targeting low-volume, exotic supercar manufacturing and that’s not really what it’s all about. PSA, in turn, isn’t pursuing it to pump out a production Peugeot Vision GT or DS E-Tense.

According to Czinger, when applied to a five-passenger sedan, 3D printing technology can cut out 75 percent of structural components and 50 percent of the structural weight while making that structure stronger. He also says Divergent’s manufacturing techniques will cost a fraction to implement as compared to traditional metal stamping and tooling.

Divergent 3D Blade
Divergent 3D Blade

We’re still not sure if Divergent 3D will have the dramatic, wide-sweeping impact on the auto manufacturing industry it is aiming for, but we are impressed with the strides it’s made since last year. We look forward to reporting more about its 3D-printing manufacturing technology in the future and the cars that come to life from it.

In the meantime, you can look more at Divergent’s new purple asphalt-eater and the chassis that resides below in our gallery.

Source: Divergent 3D

Related Posts

Audi’s R8 V10 supercar will have 525 horsepower and 196 mph.

December 10, 2008 Audi’s new incarnation of its flagship R8 supercar will hit showrooms in 2009 sporting subtle exterior refinements including re-shaped side sills, wider cooling vents, all-LED headlamps, chrome-finished grille and 10-spoke “Y design” …

Ferrari’s F12 Special Edition now has rear-wheel steering and 40 horsepower.

The Ferrari F12 Berlinetta is already one of the most powerful naturally aspirated cars on the planet, but that doesn’t mean there isn’t room for improvement. The new F12tdf opens up the possibilities, carrying 40 extra angry horses under the hood and …

Now, Rimac’s Concept_One hypercar with 1088 horsepower is more than just a concept.

When the Concept_One was first revealed back in 2011, the all-electric vehicle’s spec sheet was hard to believe. Despite this, Rimac Automobili said it was aiming to deliver a limited production run in 2013, and even opened its order book in 2012. Better …

Introducing the Artura hybrid, McLaren’s first entirely new model in ten years.

McLaren was reasonably early on the whole hybrid supercar train; while the BMW i8 was the first to break cover in 2011, it didn’t hit production until 2014. By then, the McLaren P1 , LaFerrari and Porsche 918 were all on the road making monster horsepower …

The DB12 from Aston Martin exudes success.

George Bernard Shaw famously characterized fashion as “an induced epidemic,” and the launch of Aston Martin’s new DB12 at a showbiz party on the Côte d’Azur this week was a masterclass in conjuring a mass outbreak of desire for the new “super tourer” …

Fornasari’s Gigi 311 Sports Car, akin to a Zagato

Off-kilter boutique auto-maker Fornasari brought to light its latest design venture this past month in Geneva – the Gigi 311 GT. Shown as what appears to be a rolling chassis only the Gigi 311 is promoted as a performance GT with full customization options. …

Leave a Reply

Your email address will not be published. Required fields are marked *